• Braking
  • From 60 mph, 85lbs at 500 yards, then hold and release at around 24 mph in platform then as required to stop in correct position.

1. Insert reverser handle
2. Engine run on - left panel next to dynamic brake handle
3. Fuel Pump and Generator field on
4. HEP on (big black button LHS next to headlights switch
5. Headlights on LHS panel
6. Alerter on (Shift enter) or lever valve on floor next to foot pedal.
7. Cut in brakes - knob on brake handle stand just under lever.
8. Open doors
9. Insert reverser
10. Reverser to forward
11. Release auto brake
12. Cut out valve to cut in (under brake handle)
13. Apply power

1. Come to complete stop
2. Reset throttle to idle
3. Set reverser to neutral
4. Set auto brake to release
5. Wait for brakes to charge
6. Reverser to forward
7. Drive away